CFD analysis of straight and flared vortex tube

Cryogenic Engineering Conference 2015

材料科学;物理学

Dhillon, Aman Kumar^1 ; Bandyopadhyay, Syamalendu S.^1

Indian Institute of Technology Kharagpur, Kharagpur, WB

721302, India^1

关键词: CFD modeling;    Effective thermal conductivity;    Isentropic efficiency;    K-E turbulence model;    Real gas;    Rectangular nozzle;    Temperature separation;    Three dimensional computational fluid dynamics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/101/1/012067/pdf
DOI  :  10.1088/1757-899X/101/1/012067

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Vortex tube (VT) is a simple low refrigeration producing device having no moving part. However, the flow inside it is very complex. Recent studies show that the performance of VT improves with the increase in the divergence angle of a flared VT. To explore the temperature separation phenomenon in the VT, a three dimensional computational fluid dynamics (CFD) analysis of VT has been carried out. For the present work, a VT having diameter of 12 mm, length of 120 mm, cold outlet diameter of 7 mm and hot outlet annulus of 0.4 mm with 6 straight rectangular nozzles having area of 0.5 sq. mm each is considered. The turbulence in the flow field of the VT is modeled by standard k-e turbulence model considering Redlich-Kwong real gas model. The effect of variation of divergence angle of hot tube in the VT is studied and compared with the experimental results available in the literature. The temperature separation between the hot outlet and cold outlet, in both straight and 2 degree flared tube is studied. Analysis results indicate that for a hot mass fraction above 0.5, the flared tube shows better cold production capacity compared to the straight tube. Effect of important parameters like temperature gradient, velocities (axial, radial and tangential), velocity gradients, effective thermal conductivity and viscosity of fluid etc., on heat transfer and shear work transfer in the VT have been investigated. To understand the temperature separation mechanism, heat transfer and work transfer along the axial direction have been evaluated in both straight and flared tubes. The isentropic efficiency and COP as a refrigerator as well as a heat pump of straight tube and flared tube have been computed.