An Investigation on the Pin Bearings' Optimization of a Hermetic Reciprocating Compressor

9th International Conference on Compressors and their Systems

Ozdemir, A.R.^1 ; Hacioglu, B.^2 ; Kasapoglu, E.^2

Arcelik A.S. R and D Center, Istanbul, Turkey^1

Arcelik A.S. Compressor Plant, Eskisehir, Turkey^2

关键词: Coefficient of Performance;    Efficiency measurement;    Hermetic compressors;    Hermetic reciprocating compressor;    Mechanical loss;    Operating condition;    Performance improvements;    Piston pin bearings;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/90/1/012019/pdf
DOI  :  10.1088/1757-899X/90/1/012019

来源: IOP

【 摘 要 】

A hermetic reciprocating compressor is the most energy consuming component of the refrigerators. Therefore performance improvement studies of the compressor play an important role to reduce overall energy consumption of the refrigerators. Design of bearings is one of the major study areas influencing reciprocating compressor performance. In this study crank pin and piston pin bearings in hermetic compressor applications are investigated and optimized. The effect of operating conditions, bearing offset between crank pin and piston pin, bearing clearance and bearing location along the shaft on the friction loss were investigated and optimal bearing designs were developed. Efficiency measurements of the compressor showed that the improved crank pin and piston pin bearing designs provide up to 3.8% increase in the COP as a result of reduction in mechanical loss that is significantly influenced by the length of the bearings, bearing location along the shaft and operating conditions.