A thermal model for analysis of hermetic reciprocating compressors under the on-off cycling operating condition

9th International Conference on Compressors and their Systems

Lohn, S.K.^1 ; Diniz, M.C.^1 ; Deschamps, C.J.^1

POLO Research Laboratories, Federal University of Santa Catarina, Florianopolis, SC

88040900, Brazil^1

关键词: Compressor components;    Hermetic reciprocating compressor;    Initial conditions;    Lumped formulation;    Operating condition;    Refrigeration system;    Thermal interaction;    Thermal transients;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/90/1/012068/pdf
DOI  :  10.1088/1757-899X/90/1/012068

来源: IOP

【 摘 要 】

The on-off cycling operating condition of compressors is very common in low capacity refrigeration systems, being characterized by alternate periods in which the compressor is either operating (on) or idle (off). Thermal interactions between the compressor components affect its performance during the operating period and establish the initial condition for the compressor start up from idle condition. This paper presents a numerical model to predict the temperature field of hermetic reciprocating compressors under on-off cycling conditions. The model adopts a lumped formulation for control volumes formed in the fluid solution domain and the finite volume method to solve heat conduction in the solid components. Some required heat transfer coefficients were experimentally adjusted. Predictions for temperature were compared to measurements and good agreement was observed, especially for the thermal transient during the period in which the compressor is off.