New generation of universal modeling for centrifugal compressors calculation

9th International Conference on Compressors and their Systems

Galerkin, Y.^1 ; Drozdov, A.^1

R and D Laboratory Gas Dynamics of Turbo Machines, Peter the Great St.Petersburg Polytechnic University, Polytechnical st. 29, St.Petersburg, Russia^1

关键词: Empirical coefficients;    Loading factors;    Model verification;    Multistage compressor;    Non-uniformities;    Performance curve;    Universal model;    Vaneless diffuser;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/90/1/012040/pdf
DOI  :  10.1088/1757-899X/90/1/012040

来源: IOP

【 摘 要 】

The Universal Modeling method is in constant use from mid - 1990th. Below is presented the newest 6thversion of the Method. The flow path configuration of 3D impellers is presented in details. It is possible to optimize meridian configuration including hub/shroud curvatures, axial length, leading edge position, etc. The new model of vaned diffuser includes flow non-uniformity coefficient based on CFD calculations. The loss model was built from the results of 37 experiments with compressors stages of different flow rates and loading factors. One common set of empirical coefficients in the loss model guarantees the efficiency definition within an accuracy of 0.86% at the design point and 1.22% along the performance curve. The model verification was made. Four multistage compressors performances with vane and vaneless diffusers were calculated. As the model verification was made, four multistage compressors performances with vane and vaneless diffusers were calculated. Two of these compressors have quite unusual flow paths. The modeling results were quite satisfactory in spite of these peculiarities. One sample of the verification calculations is presented in the text. This 6th version of the developed computer program is being already applied successfully in the design practice.