Repair of filament wound composite pipes

2015 Global Conference on Polymer and Composite Materials

材料科学;化学

Amali, Ramin^1 ; Arnall, Heather^1

University of the West of England, Coldharbour Lane, Bristol

BS16 1QY, United Kingdom^1

关键词: Composite pipe;    FEA software;    Filament wound;    High strength;    Metal pipes;    Pipe diameter;    Repair process;    Thin-walled;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/87/1/012055/pdf
DOI  :  10.1088/1757-899X/87/1/012055

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Filament wound pipes are used in a wide variety of industries, due to the advantages composites have over metal pipes, such as a high strength to weight ratio, and resistance against frost, corrosion and heat. Composite pipes require minimal maintenance to ensure they are safe. Any damage occurring in composite pipes could lead to failure; therefore all damage should be assessed through NDT. If it is decided that the damage makes the pipe unsafe then a decision needs to be made whether to repair or replace the pipe. Repairing a composite pipe can be quicker, easier and cheaper than replacing it and can restore the strength of the pipe effectively. This investigation looks at the repair process and the parameters involved in determining the strength of the pipe following repair through the use of over 150 models in FEA software, Abaqus. Parameters considered include the pipe diameter and thickness, damage removal size and wrap width and thickness. It was found that if the pipe is thin-walled then it can be assumed that the pipe's thickness has no effect on the FOS following repair. Formulas were created to predict the FOS following repair for varying pipe diameters, damage sizes and wrap thickness. Formulas were also created to determine the wrap width required for varying wrap thicknesses and damage sizes.