Study on sources of charging lead acid batteries

International Conference on Applied Sciences 2014

Dini, C.M.^1 ; Popa, G.N.^1 ; Iagr, A.^1

Politehnica University of Timisoara, Department of Electrical Engineering and Industrial Informatics, 5 Revolution Street, Hunedoara

331128, Romania^1

关键词: Battery capacity;    Battery voltages;    Charging process;    Constant current;    Constant voltage;    Data acquisition cards;    Intelligent power;    Power sources;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/85/1/012011/pdf
DOI  :  10.1088/1757-899X/85/1/012011

来源: IOP

【 摘 要 】

The paper presents the general characteristics of lead acid batteries and two charging methods of these batteries. For charging of lead batteries was used an intelligent power source K 8012 (from Velleman). The power source allows fixing the level of the battery voltage and battery capacity. The intelligent power source uses the joint method (at constant current and, then, at constant voltage) and warning that indicates different situations in the charging process. Other method of charging presented in the paper is at constant voltage using a stabilized power source. In the paper experimental measurements were carried out using data acquisition card SER 10 BIT (from Conrad) for charging/ discharging of a lead acid battery 12V/9Ah (using an intelligent power source) and charging of another high capacity lead acid battery 12V/47Ah/390 A (using a stabilized power source). At the discharging of the lead acid batteries it were used automotive lamps as electric loads.