A study of residence time distribution using radiotracer technique in the large scale plant facility

International Nuclear Science and Technology Conference 2016

Wetchagarun, S.^1 ; Tippayakul, C.^1 ; Petchrak, A.^1 ; Sukrod, K.^1 ; Khoonkamjorn, P.^1

Reactor Center, Thailand Institute of Nuclear Technology (Public Organization), Bangkok

10900, Thailand^1

关键词: Industrial facilities;    Mean residence time;    Nuclear technology;    Process plants;    Public organizations;    Radiotracer techniques;    Site availability;    Water treatment facilities;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/860/1/012015/pdf
DOI  :  10.1088/1742-6596/860/1/012015

来源: IOP

【 摘 要 】

As the demand for troubleshooting of large industrial plants increases, radiotracer techniques, which have capability to provide fast, online and effective detections to plant problems, have been continually developed. One of the good potential applications of the radiotracer for troubleshooting in a process plant is the analysis of Residence Time Distribution (RTD). In this paper, the study of RTD in a large scale plant facility using radiotracer technique was presented. The objective of this work is to gain experience on the RTD analysis using radiotracer technique in a "larger than laboratory" scale plant setup which can be comparable to the real industrial application. The experiment was carried out at the sedimentation tank in the water treatment facility of Thailand Institute of Nuclear Technology (Public Organization). Br-82 was selected to use in this work due to its chemical property, its suitable half-life and its on-site availability. NH4Br in the form of aqueous solution was injected into the system as the radiotracer. Six NaI detectors were placed along the pipelines and at the tank in order to determine the RTD of the system. The RTD and the Mean Residence Time (MRT) of the tank was analysed and calculated from the measured data. The experience and knowledge attained from this study is important for extending this technique to be applied to industrial facilities in the future.