Reviewing three dimensional dosimetry: basics and utilization as presented over 17 Years of DosGel and IC3Ddose

9th International Conference on 3D Radiation Dosimetry

Schreiner, L.J.^1,2

Department of Medical Physics, Cancer Centre of Southeastern Ontario, Kingston General Hospital, Kingston

ON

K7L 5P9, Canada^1

Departments of Oncology and Physics, Queen's University, Kingston

ON

K7L 3N6, Canada^2

关键词: 3-D measurement;    Dose distributions;    Intensity-modulated;    Modern techniques;    Radiation-sensitive materials;    Science and engineering;    Three dimensions;    Validation approach;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/847/1/012001/pdf
DOI  :  10.1088/1742-6596/847/1/012001

来源: IOP

【 摘 要 】

For seventeen years a community of basic and clinical scientists and researchers has been meeting bi-annually to promote the clinical advance of techniques to measure radiation dose in three dimensions. The interest in this dosimetry was motivated by its promise as an effective methodology for 3D measurement of the complex conformal dose distributions achieved by modern techniques such as Intensity Modulated and Volumetric Arc Radiation Therapy. Each of the International Conferences on 3D Radiation Dosimetry resulted in the publication of informative proceedings [1-8], the majority openly available on the internet. The proceedings included papers that: i) reviewed the basic science of the radiation sensitive materials used to accumulate the dose information, ii) introduced the science and engineering of the imaging systems required to read the information out, iii) described the work flows and systems required for efficient dosimetry, iv) reported the protocols required for reproducible dosimetry, and v) showed examples of clinical use illustrating advantage and limitations of the dosimetry. This paper is intended to use the framework provided by these proceedings to review the current 3D chemical dosimeters available and to discuss the requirements for their use. The paper describes how 3D dosimetry can complement other dose delivery validation approaches available in the clinic. It closes with some personal reflections of how the motivation for, and practice of, 3D dosimetry have changed (or not) over the years.