Modification of the rheological properties of screen printing ceramic paints containing gold

2nd International Conference on Rheology and Modeling of Materials

Izak, P.^1 ; Mastalska-Poplawska, J.^1 ; Lis, J.^1 ; Stempkowska, A.^2

JAGH University of Science and Technology, Faculty of Materials Science and Ceramics, Krakow, Poland^1

AGH University of Science and Technology, Faculty of Mining and Geoengineering, Krakow, Poland^2

关键词: Anti-thixotropy;    Compaction process;    Flow curves;    Gold paste;    Industrial conditions;    Rheological property;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/790/1/012011/pdf
DOI  :  10.1088/1742-6596/790/1/012011

来源: IOP

【 摘 要 】

This work presents the results of modification of rheological properties of screen printing paints containing gold. 15 wt% glossy gold paste and 15 wt% glossy liquid gold were used as modifiers containing gold. The study showed that the gold paint for screen printing can be obtained by evaporation of the 15 wt% liquid gold and the golden luster. The compaction process of liquid gold by evaporation is slow and easy to perform in industrial conditions. The second way to adapt the 15 wt% gold ceramic paint for screen printing application depended on adding the aniseed oil and the pine oil. The course of the flow curve of the gold paste without modification indicates that it is shear thinning and shows the desired effect of thixotropy, and even anti-thixotropy, at low shear rates (-1s-1). The introduction of the essential oils eliminates this phenomenon and the paste converts itself from the non-rheostable to the rheostable liquid.