Non-destructive methods of control of thermo-physical properties of fuel rods

International Conference for Young Scientists, Specialists, and Postgraduates on Nuclear Reactor Physics 2016

Kruglov, A.B.^1 ; Kruglov, V.B.^1 ; Kharitonov, V.S.^1 ; Struchalin, P.G.^1 ; Galkin, A.G.^1

National Research Nuclear University, Moscow Engeneering Physics Institute, Moscow, Russia^1

关键词: Amount of information;    Calculation models;    Contact thermal resistance;    Fuel thermal conductivity;    Laser flash methods;    Nondestructive methods;    Numerical calculation;    Thermo-physical property;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/781/1/012051/pdf
DOI  :  10.1088/1742-6596/781/1/012051

来源: IOP

【 摘 要 】

Information about the change of thermal properties of the fuel elements needed for a successful and safe operation of the nuclear power plant. At present, the existing amount of information on the fuel thermal conductivity change and "fuel-shell" thermal resistance is insufficient. Also, there is no technique that would allow for the measurement of these properties on the non-destructive way of irradiated fuel elements. We propose a method of measuring the thermal conductivity of the fuel in the fuel element and the contact thermal resistance between the fuel and the shell without damaging the integrity of the fuel element, which is based on laser flash method. The description of the experimental setup, implementing methodology, experiments scheme. The results of test experiments on mock-ups of the fuel elements and their comparison with reference data, as well as the results of numerical modeling of thermal processes that occur during the measurement. Displaying harmonization of numerical calculation with the experimental thermograms layout shell portions of the fuel cell, confirming the correctness of the calculation model.