The design of an embedded system for controlling humidity and temperature room

8th International Conference on Physics and its Applications

Dwi Teguh, R.^1 ; Didik Eko, S.^1 ; Laksono, Pringgo D.^2 ; Jamaluddin, Anif^1

Department of Physic Education, Teaching and Training Faculty, Sebelas Maret University, Surakarta, Indonesia^1

Industrial Engineering Department, Engineering Faculty, Sebelas Maret University, Surakarta, Indonesia^2

关键词: Arduino;    Humidity and temperatures;    Temperature and humidities;    Water pump;    Water vapour;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/776/1/012096/pdf
DOI  :  10.1088/1742-6596/776/1/012096

来源: IOP

【 摘 要 】

The aim of the system is to design an embedded system for maintenance confortable room. The confortable room was design by controlling temperature (on range 18 - 34 °C) and humidity (on range 40% - 70%.) of room condition. Temperature and humidity of room were maintained using four variable such as lamp for warm, water pump for distributing water vapour, a fan for air circullation and an exhaust-fan for air cleaner. The system was constucted both hardware (humidity sensor, microcontroller, pump, lamp, fan) and software (arduino IDE). The result shows that the system was perfectly performed to control room condition.