Coupling of electromagnetic and structural dynamics for a wind turbine generator

The Science of Making Torque from Wind

Matzke, D.^1 ; Rick, S.^1,2 ; Hollas, S.^2 ; Schelenz, R.^1 ; Jacobs, G.^1 ; Hameyer, K.^1,2

Center for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, Aachen

52070, Germany^1

Institute of Electrical Machines, RWTH Aachen University, Germany^2

关键词: Degree of freedom;    Electromagnetic modeling;    Electromagnetic systems;    Experimental modal analysis;    Mechanical response;    Multibody simulations;    Reciprocal effects;    Reference generator;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/753/8/082034/pdf
DOI  :  10.1088/1742-6596/753/8/082034

来源: IOP

【 摘 要 】

This contribution presents a model interface of a wind turbine generator to represent the reciprocal effects between the mechanical and the electromagnetic system. Therefore, a multi-body-simulation (MBS) model in Simpack is set up and coupled with a quasi-static electromagnetic (EM) model of the generator in Matlab/Simulink via co-simulation. Due to lack of data regarding the structural properties of the generator the modal properties of the MBS model are fitted with respect to results of an experimental modal analysis (EMA) on the reference generator. The used method and the results of this approach are presented in this paper. The MB S model and the interface are set up in such a way that the EM forces can be applied to the structure and the response of the structure can be fed back to the EM model. The results of this cosimulation clearly show an influence of the feedback of the mechanical response which is mainly damping in the torsional degree of freedom and effects due to eccentricity in radial direction. The accuracy of these results will be validated via test bench measurements and presented in future work. Furthermore it is suggested that the EM model should be adjusted in future works so that transient effects are represented.