Experimental and operational modal analysis of a laboratory scale model of a tripod support structure.

The Science of Making Torque from Wind

Luczak, M.M.^1 ; Mucchi, E.^2 ; Telega, J.^1

Institute of Fluid Flow Machinery PAS, Fiszera 14, Gdansk, Poland^1

University of Ferrara, Via Saragat 1, Ferrara

44122, Italy^2

关键词: Dynamic property;    Experimental and operational modal analysis;    Experimental campaign;    Modal parameters;    Nonlinear structural response;    Structural failure;    Support structures;    Supporting structure;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/753/7/072008/pdf
DOI  :  10.1088/1742-6596/753/7/072008

来源: IOP

【 摘 要 】

The goal of the research is to develop a vibration-based procedure for the identification of structural failures in a laboratory scale model of a tripod supporting structure of an offshore wind turbine. In particular, this paper presents an experimental campaign on the scale model tested in two stages. Stage one encompassed the model tripod structure tested in air. The second stage was done in water. The tripod model structure allows to investigate the propagation of a circumferential representative crack of a cylindrical upper brace. The in-water test configuration included the tower with three bladed rotor. The response of the structure to the different waves loads were measured with accelerometers. Experimental and operational modal analysis was applied to identify the dynamic properties of the investigated scale model for intact and damaged state with different excitations and wave patterns. A comprehensive test matrix allows to assess the differences in estimated modal parameters due to damage or as potentially introduced by nonlinear structural response. The presented technique proves to be effective for detecting and assessing the presence of representative cracks.