Effect of pre-strain on mechanical properties and deformation induced transformation of 304 stainless steel

6th Asian Physics Symposium

Zulfi, Fahri R.^1 ; Korda, Akhmad A.^1

Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Bandung Institute of Technology, Jl. Ganesha 10, Bandung

40132, Indonesia^1

关键词: 304 stainless steel;    Deformation induced transformations;    Deformation-induced phase transformations;    Martensite volume fraction;    Metastable austenite;    Tensile deformation;    Test specimens;    XRD studies;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/739/1/012039/pdf
DOI  :  10.1088/1742-6596/739/1/012039

来源: IOP

【 摘 要 】

Effect of pre-strain on mechanical properties and deformation induced phase transformation of 304 stainless steel under tensile deformation has been studied. Pre-strain with the variation percentage of deformation was applied to the tensile test specimens. Tensile and hardness testing were carried out after pre-strain to study the mechanical properties change. Deformation induced phase transformation was investigated by using X-ray diffraction and optical microscope. XRD study indicates that metastable austenite transforms to martensite due to deformation. The martensite volume fraction increases with the increase in percentage of deformation. The increase in strength and hardness were associated with an increase in the volume fraction of martensite.