Simulations of the cosmic-veto system for the COMET experiment

International Conference on Particle Physics and Astrophysics

Markin, Oleg^1 ; Tarkovsky, Evgueny^1

National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Kashirskoe highway 31, Moscow

115409, Russia^1

关键词: Computer modeling;    Detector design;    Geant4 toolkits;    Lepton number;    Muon capture;    Scintillator strips;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/675/4/042012/pdf
DOI  :  10.1088/1742-6596/675/4/042012

来源: IOP

【 摘 要 】

In the COMET experiment searching for the muon-electron conversion not conserving lepton numbers, a scintillator-strip-based veto system will be used to prohibit the COMET detector from fake signals initiated by cosmic muons. In order to verify the efficiency of the system, we have built its computer model and carried out various simulations. To tune the model, experimentally measured data are utilized. The simulations give the inefficiency of the cosmic-muon registration being below 0.0001, which meets requirements of the experiment. In addition, simulations of neutrons originating from muon captures and traversing a shield beneath the cosmic-veto system have been carried out using the Geant4 toolkit. A Geant4 application has been written with an appropriate detector design and possible spectrum of neutrons' energy. Design of the shield has been optimized to ensure the time loss concerned with fake veto signals caused by the background neutrons is tolerable. Materials of shield's layers are chosen, and optimum thicknesses of the layers are computed.