Multilayer ferroelectret-based energy harvesting insole

15th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications

物理学;能源学

Luo, Z.^1 ; Zhu, D.^1,2 ; Beeby, S.P.^1

Electronics and Computer Science, University of Southampton, Southampton

SO171BJ, United Kingdom^1

School of Computing, Electronics and Maths, Faculty of Engineering, Environment and Computing, Coventry University, Coventry

CV15FB, United Kingdom^2

关键词: Compressive forces;    Ferroelectret;    Ferroelectrets;    Low Power;    Number of layers;    Wearable applications;    Wireless signal transmission;    Wireless transmitter;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/660/1/012118/pdf
DOI  :  10.1088/1742-6596/660/1/012118

来源: IOP

【 摘 要 】

This paper reports a flexible energy harvesting insole made of multilayer ferroelectrets, and demonstrates that this insole can power a wireless signal transmission. We have previously studied the energy harvesting characteristics of single and 10-layer ferroelectrets under compressive forces with quantified amplitudes and frequencies. In this work, we fabricate a flexible insole using multilayer ferroelectrets, and increase the number of layers from 10 up to 80, then use this insole to harvest energy from footsteps. We use this insole to power a commercial ZigBee wireless transmitter, and successfully demonstrate that an 8-bit data transmission can be solely powered by the energy harvested from this insole for every 3 to 4 footsteps. It confirms the anticipation from our previous work that the multilayer ferroelectrets are capable of powering the start-up and transmission of a low-power chipset, and shows a potential of using this energy harvesting insole in wearable applications.