An investigation of PDMS structures for optimized ferroelectret performance

14th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications

物理学;能源学

Shi, J.^1 ; Zhu, D.^1 ; Beeby, S.P.^1

Electronics and Electrical Engineering Group, Electronics and Computer Science, University of Southampton, Southampton

SO17 1BJ, United Kingdom^1

关键词: ANSYS simulation;    Fabrication process;    Ferroelectret;    Piezoelectric coefficient;    Void geometry;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/557/1/012104/pdf
DOI  :  10.1088/1742-6596/557/1/012104

来源: IOP

【 摘 要 】

This paper reports the ANSYS simulation and fabrication processes for optimising PDMS ferroelectret performance. The proposed model extends the previously published analytical models and compares this with simulation of individual void geometry. The ferroelectret material is fabricated from PDMS using 3D-printed plastic moulds. The analytical model and Ansys simulation results predict the variation in performance of the PDMS ferroelectret with the different void geometry and surface charge density. The theoretical maximum piezoelectric coefficient d33 achieved was about 220 pC/N. The experimental maximum d33 obtained was 172 pC/N.