Low power electronic interface for electrostatic energy harvesters

15th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications

物理学;能源学

Phan, Tra Nguyen^1 ; Azadmehr, Mehdi^1 ; Le, Cuong Phu^1 ; Halvorsen, Einar^1

Department of Micro- and Nanosystem Technology, Buskerud and Vestfold University College, Raveien 215, Borre

3184, Norway^1

关键词: Charge pump;    Comb drive;    Design and simulation;    Electrostatic energies;    Initial voltages;    Low-power electronic interfaces;    Power electronic interface;    Sub-circuits;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/660/1/012087/pdf
DOI  :  10.1088/1742-6596/660/1/012087

来源: IOP

【 摘 要 】

This paper presents design and simulation of a power electronic interface circuit for MEMS electrostatic energy harvesters. The designed circuit is applicable to highly miniaturized electrostatic harvesters with small transducer capacitances below 10 pF. It is based on comb- drive harvesters with two anti-phase capacitors that are connected as charge pumps and uses a flyback-path scheme. Controlled activation and deactivation of sub-circuits, some by help of clocking, were exploited to reduce power consumption down to 1.03 μW. Net power generation can be achieved with as low initial voltage as 3.0 V.