Pressurized air injection in an axial hydro-turbine model for the mitigation of tip leakage cavitation

9th International Symposium on Cavitation

Rivetti, A.^1 ; Angulo, M.^1 ; Lucino, C.^1 ; Liscia, S.^1

UNLP Laboratory of Hydromechanics, 47 Street N 200, La Plata, Argentina^1

关键词: Beneficial effects;    Noise and vibration;    Operating condition;    Oscillatory patterns;    Structural component;    Tip leakage cavitation;    Tip leakage vortex;    Tip vortex cavitations;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/656/1/012069/pdf
DOI  :  10.1088/1742-6596/656/1/012069

来源: IOP

【 摘 要 】

Tip leakage vortex cavitation in axial hydro-turbines may cause erosion, noise and vibration. Damage due to cavitation can be found at the tip of the runner blades on the low pressure side and the discharge ring. In some cases, the erosion follows an oscillatory pattern that is related to the number of guide vanes. That might suggest that a relationship exists between the flow through the guide vanes and the tip vortex cavitating core that induces this kind of erosion. On the other hand, it is known that air injection has a beneficial effect on reducing the damage by cavitation. In this paper, a methodology to identify the interaction between guide vanes and tip vortex cavitation is presented and the effect of air injection in reducing this particular kind of erosion was studied over a range of operating conditions on a Kaplan scale model. It was found that air injection, at the expense of slightly reducing the efficiency of the turbine, mitigates the erosive potential of tip leakage cavitation, attenuates the interaction between the flow through the guide vanes and the tip vortex and decreases the level of vibration of the structural components.