Electrostatic adhesion of polymer particles to a foil electrode

Electrostatics 2015

物理学;数学

Ziteng, Li^1 ; Praeger, Matthew^1 ; Smallwood, Jeremy^1 ; Lewin, Paul^1

Tony Davies High Voltage Laboratory, University of Southampton, United Kingdom^1

关键词: Adhesion factors;    Applied voltages;    Dielectrophoretic forces;    Electrostatic adhesion;    Flexible polymer foils;    Inter-digitated electrodes;    Polymer particles;    Vibration condition;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/646/1/012029/pdf
DOI  :  10.1088/1742-6596/646/1/012029

来源: IOP

【 摘 要 】

The SPABRINK EU project requires temporary adhesion of coloured solid "ink" particles to a surface, for later recovery and reuse. This is achieved through the use of dielectrophoretic force under the control of a voltage applied to an interdigitated electrode pattern on the polymer foil. One concern is the ability to hold particles under vibration conditions. In this paper we present an experimental study of the adhesion of 50-300 μm polymer particles to an experimental interdigitated electrode structure on flexible polymer foil. Powder loss as a function of calibrated displacement and applied voltage to the electrodes are presented. This is compared with theoretical results obtained by modelling adhesion using Pohl's equation in terms of an "adhesion factor". Some difficulties in directly comparing experimental and modelling results are discussed.