Validation of DYSTOOL for unsteady aerodynamic modeling of 2D airfoils

The Science of Making Torque from Wind 2014

González, A.^1 ; Gomez-Iradi, S.^1 ; Munduate, X.^1

CENER, National Renewable Energy Centre, Avenida de la Innovacion 7, 31621Sarriguren, Navarra, Spain^1

关键词: Beddoes-Leishman model;    Blade-element momentums;    Operating condition;    Pitch oscillations;    Reduced frequency;    Renewable wind energy;    Unsteady aerodynamics;    Wind turbine modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/524/1/012130/pdf
DOI  :  10.1088/1742-6596/524/1/012130

来源: IOP

【 摘 要 】

From the point of view of wind turbine modeling, an important group of tools is based on blade element momentum (BEM) theory using 2D aerodynamic calculations on the blade elements. Due to the importance of this sectional computation of the blades, the National Renewable Wind Energy Center of Spain (CENER) developed DYSTOOL, an aerodynamic code for 2D airfoil modeling based on the Beddoes-Leishman model. The main focus here is related to the model parameters, whose values depend on the airfoil or the operating conditions. In this work, the values of the parameters are adjusted using available experimental or CFD data. The present document is mainly related to the validation of the results of DYSTOOL for 2D airfoils. The results of the computations have been compared with unsteady experimental data of the S809 and NACA0015 profiles. Some of the cases have also been modeled using the CFD code WMB (Wind Multi Block), within the framework of a collaboration with ACCIONA Windpower. The validation has been performed using pitch oscillations with different reduced frequencies, Reynolds numbers, amplitudes and mean angles of attack. The results have shown a good agreement using the methodology of adjustment for the value of the parameters. DYSTOOL have demonstrated to be a promising tool for 2D airfoil unsteady aerodynamic modeling.