Fatigue loading on a 5MW offshore wind turbine due to the combined action of waves and current

The Science of Making Torque from Wind 2014

Peeringa, Johan M.^1

ECN (Energy Research Centre of the Netherlands), Westerduinweg 3, 1755 LE Petten, Netherlands^1

关键词: Combined actions;    Fatigue loadings;    Frequency shift;    Support structures;    Wave current interaction;    Wave excitation;    Wave frequencies;    Waves and currents;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/524/1/012093/pdf
DOI  :  10.1088/1742-6596/524/1/012093

来源: IOP

【 摘 要 】

In the design of an offshore wind turbine the natural frequencies of the structure are of importance. In the design of fixed offshore wind turbine support structures it cannot be avoided that the first eigenmode of the structure lies in the frequency band of wave excitation. This study indicates that wave-current interaction should be taken into account for support structure design load calculations. Wave-current interaction changes the shape of the wave spectrum and the energy content in the wave frequency range of 0.2-0.35Hz. This is in the range of natural frequencies fixed offshore wind turbine structures are designed for. The waves are affected by the current in two ways. First there is a frequency shift, Doppler effect, for the fixed observer when the wave travels on a current. Second the shape of the wave is modified in case the wave travels from an area without current into an area with current. Due to wave-current interaction the wave height and wave length change. For waves on an opposing current the wave energy content increases, while for wave on a following current the wave energy content slightly reduces. Simulations of normal production cases between cut-in and cut-out wind speed are performed for a 5MW wind turbine in 20m water depth including waves with 1) a following current, 2) an opposing current and 3) no current present. In case of waves having an opposing current, the 1Hz equivalent fore-aft tower bending moment at the seabed is about 10% higher compared to load cases with waves only.