A concept study of a carbon spar cap design for a 80m wind turbine blade

The Science of Making Torque from Wind 2014

Rosemeier, M.^1 ; Bätge, M.^1

Department Rotor Blade, Fraunhofer Institute for Wind Energy and Energy System Technology IWES, Am Seedeich 45, 27572 Bremerhaven, Germany^1

关键词: Buckling resistance;    Concept studies;    Design concept;    Large wind turbines;    Modal properties;    Parametric study;    Stability limit;    Wind turbine blades;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/524/1/012039/pdf
DOI  :  10.1088/1742-6596/524/1/012039

来源: IOP

【 摘 要 】

The buckling resistance is a key design driver for large wind turbine blades with a significant influence on the material costs. During the structural design process the choice was made for carbon spar caps and two shear webs, which were set relatively far apart in order to stabilize the panels. This design presented a major challenge for the stability of the spar caps. The topology of these spar caps has been modified with regard to stability, comparing a continuous spar cap with split spar cap concepts and considering both lay-ups with hybrid carbon glass spar caps or sandwich concepts. Within those concepts, parametric studies were conducted varying different geometrical parameters of the spar caps and its layups. In order to determine the buckling resistance of the spar cap, an analytical model considering a 2D cross section discretized blade model was utilized to select the basic concept, after which a 3D numerical finite element model taking the whole blade into account was used to evaluate the chosen design concepts. The stability limit state analysis was conducted according to the certification scheme of GL guideline 2012. The various concepts were evaluated based on the blade's mass, tip deflection and modal properties. The results of this design process of the spar caps and the evaluation of the used analysis tools are presented within the paper.