Qualification and validation the metrology module located on CN machine tool -EMCO PC Mill 155 _

14th International Conference on Metrology and Properties of Engineering Surfaces

Merghache, S.^1 ; Ghernaout, A.^2

Department of Mechanics, Faculty of the Engineer's Sciences, University of Tlemcen, BP 119, Tlemcen 13000, Algeria^1

Department of Mechanics, University of Tlemcen, BP 119, Tlemcen 13000, Algeria^2

关键词: Digital control;    Innovative solutions;    Manufacturing process;    Measurement and control;    Modern machines;    Probe systems;    Software acquisition;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/483/1/012024/pdf
DOI  :  10.1088/1742-6596/483/1/012024

来源: IOP

【 摘 要 】

The contribution of machine tools in the blooming of several industrial domains is not to be demonstrated any more. However, during the last decade, the economic context imposed on this industry new standard of performance as regards the quality, the productivity, the costs and the delay of the production. The evolution of digitally operated modern machines drives integration of measurement and control in the cycle of manufacturing. The probe system brings an innovative solution to the improvement of CN machine tools efficiency and significantly expand its range of applications to improve the manufacturing process. The purpose of this article is to present our approach on the integration and the qualification of a metrology module associated with a software acquisition and analysis in relation to the digital control, a solution which we fulfilled and validated within our laboratory.