High-order Vibration Characteristics of Rotating Thin Shells and Hard-coating Damping Effects

4th Symposium on the Mechanics of Slender Structures

物理学;力学

Song, X.Y.^1 ; Ren, H.J.^1 ; Wang, X.P.^2 ; Li, X.J.^3 ; Han, Q.K.^1,3

School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, China^1

Shenyang Engine Design and Research Institute, Shenyang, 110015, China^2

Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Xiangtan, 411201, China^3

关键词: Centrifugal Forces;    Clamped-free boundary conditions;    Coating material;    Material parameter;    Modal characteristics;    Modal frequency;    Transfer matrixes;    Vibration characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/448/1/012002/pdf
DOI  :  10.1088/1742-6596/448/1/012002

学科分类：力学，机械学

来源: IOP

【 摘 要 】

The high-order modes and the moving wave characteristics of rotating thin shell are investigated in this paper based on transfer matrix method when the damping effects of the hard-coating layers are applied on the shell. Firstly, the dynamic model of the thin shell is obtained based on the Love theory, with introducing centrifugal force and Coriolis force. Then, the transfer matrix formulas of the shell with partially coated layers at different segments are obtained under the clamped-free boundary condition, in which the mechanical property of the hard-coating material is simplified to be linear and isotropic. The modal characteristics of the shell are calculated numerically. The obtained higher order modal frequencies of the partially coated shells are compared with those of the bare shell. The effects of the material parameters and locations of the hard-coating layers are also illustrated based on the different modal characteristics., great care should be taken in constructing both.