Multi-layer Fracturing Technology and the Application in CK Oilfield to Enhance the Recovery

2018 International Conference on Air Pollution and Environmental Engineering

生态环境科学

Deng, Qiang^1 ; Liu, Man^2 ; Lu, Xiao^2 ; Yu, Tao^1 ; Chen, Shijun^1 ; Chen, Gang^1,3

College of Chemistry and Chemical Engineering, Shaanxi Prov. Key Laboratoryof Environ. Poll. Contr. and Reservoir Protect. Technology of Oilfields, Xi'An Shiyou University, Xi'an, China^1

Oil Production Plant No. 11, PetroChina Changqing Oilfield Company, Xi'an

710200, China^2

State Key Laboratory of Petroleum Pollution Control, CNPC Research Institute OfSafety and Environmental Technology, Beijing, China^3

关键词: Downholes;    Hydraulic fracturing methods;    Multiple layers;    Oil production;    One-time;    Reservoir characteristic;    Single well production;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/208/1/012116/pdf
DOI  :  10.1088/1755-1315/208/1/012116

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

In the operation of new well fracturing, multi-layers are opened at one time, and each layer is separately fractured by downhole fracturing tool and hydraulic fracturing method, and the fluid is discharged from each layer for production. Such fracturing technology is called a well multi-layer fracturing technology. The fracturing technology is restricted by the reservoir characteristics. The multi-layer fracturing technology of one well is an effective practical technique in the practice of fracturing and testing for the wells with the same formation and multiple layers. This technology has been applied in CK Oilfield. The daily oil production of a well with multiple fractured wells is higher than that of the combined wells. According to the data of 15 wells in a well in the CK Oilfield, the average daily oil production per well is 3.95t/d. There are 7 combined wells, and the average daily oil production per well is 1.78t/d. The average single well production multi-layer fractured well is 2.17t/d.