Backflow vortex behaviours in contra-rotating axial flow pump at low flow rates

Asian Working Group- IAHR's Symposium on Hydraulic Machinery and Systems

Zhang, D.^1 ; Tsuneda, T.^1 ; Katayama, Y.^2 ; Watanabe, S.^2 ; Tsuda, S.I.^2 ; Furukawa, A.^3

Graduate School of Engineering, Kyushu University, Fukuoka, Japan^1

Department of Mechanical Engineering, Kyushu University, Fukuoka, Japan^2

National Institute of Technology, Oita College, Oita, Japan^3

关键词: Contra-rotating axial;    Counter rotating;    Low frequency range;    Low-frequency components;    Pressure fluctuation;    Shear layer instability;    Unsteady numerical simulations;    Vortical structures;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/163/1/012036/pdf
DOI  :  10.1088/1755-1315/163/1/012036

来源: IOP

【 摘 要 】

Backflow usually exists at the inlet of rotors of many turbomachines at low flow rates. In counter-rotating rotors applied for the axial flow pump, such vortical structures are also able to form. In our previous researches, some broad-banded pressure fluctuations in low frequency range have been observed between front and rear rotors, but we have not yet been able to explain what causes such phenomenon. In this study, in order to find out the causes of low frequency components at low flow rates, unsteady numerical simulations for the whole front and rear rotors are conducted, and casing pressure is experimentally measured at the inlet and outlet of front rotor and the inlet of rear rotor. It is found that vortical structures exist between front and rear rotors at below 40% of design flow rate. These vortices seem to be the result of shear layer instability at the impingement location of the exiting flow from front rotor to the backflow of rear rotor. The behaviours of these backflow vortices and their interaction with front rotor contribute the low frequency components in pressure fluctuations observed at low flow rates.