Design of a In-situ Ammonia Nitrogen Analyzer in Seawater

2018 2nd International Workshop on Renewable Energy and Development

能源学;经济学

Guo, C.L.^1 ; Zhang, S.W.^1 ; Cheng, Y.Q.^1 ; Ma, R.^1,2 ; Chu, D.Z.^1 ; Zhang, L.^1

Institute of Oceanographic Instrumentation, Qilu University of Technology, Shandong Academy of Sciences, Shandong Key Laboratory of Ocean Environmental Monitoring Technology, Qingdao City, Shandong Province

266001, China^1

Engineering College, Ocean University of China, Qingdao City, Shandong Province

266100, China^2

关键词: Detection limits;    Flow injection analysis;    High sensitivity;    National standard;    Peristaltic pump;    Reagent consumption;    Relative standard deviations;    Wet chemical reactions;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/153/2/022013/pdf
DOI  :  10.1088/1755-1315/153/2/022013

来源: IOP

【 摘 要 】

A in-situ ammonia nitrogen analyzer in seawater was designed based on wet chemical reaction principle, combined the fluorospectrophotometry method with flow injection analysis. The analyzer was controlled by peristaltic pump and tree-way valve, which has the advantages of high sensitivity, low-reagent consumption and can measure the concentration of ammonia nitrogen in seawater in-situ. The detection range was 10∼500μg/L, while the detection limit was 1.80μg/L and the relative standard deviation (RSD) was less than 2%. The on-site comparison tests between the ammonia nitrogen analyzer and the national standard methods were finished, and the results indicated that the analyzer was entirely feasible and could reflect the content and changes of the ammonia nitrogen in the seawater.