The usage of carbon fiber reinforcement polymer and glass fiber reinforcement polymer for retrofit technology building

Friendly City 4 'From Research to Implementation For Better Sustainability'

地球科学;经济学

Tarigan, Johannes^1 ; Meka, Randi^1 ; Nursyamsi^1

Department of Civil Engineering, Faculty of Engineering, Universitas Sumatera Utara, Jalan Almamater, Medan

20155, Indonesia^1

关键词: Carbon fiber reinforcement polymers;    Concrete cylinders;    Fiber reinforcement polymers;    High-tensile strength;    Loading capacities;    Material technologies;    Maximum load;    Two-materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/126/1/012024/pdf
DOI  :  10.1088/1755-1315/126/1/012024

来源: IOP

【 摘 要 】

Fiber Reinforcement Polymer has been used as a material technology since the 1970s in Europe. Fiber Reinforcement Polymer can reinforce the structure externally, and used in many types of buildings like beams, columns, and slabs. It has high tensile strength. Fiber Reinforcement Polymer also has high rigidity and strength. The profile of Fiber Reinforcement Polymer is thin and light, installation is simple to conduct. One of Fiber Reinforcement Polymer material is Carbon Fiber Reinforcement Polymer and Glass Fiber Reinforcement Polymer. These materials is tested when it is installed on concrete cylinders, to obtain the comparison of compressive strength CFRP and GFRP. The dimension of concrete is diameter of 15 cm and height of 30 cm. It is amounted to 15 and divided into three groups. The test is performed until it collapsed to obtain maximum load. The results of research using CFRP and GFRP have shown the significant enhancement in compressive strength. CFRP can increase the compressive strength of 26.89%, and GFRP of 14.89%. For the comparison of two materials, CFRP is more strengthening than GFRP regarding increasing compressive strength. The usage of CFRP and GFRP can increase the loading capacity.