Bio-coal briquettes using low-grade coal

Global Colloquium on GeoSciences and Engineering 2017

Estiaty, L.M.^1 ; Fatimah, D.^1 ; Widodo^1

Research Center for Geotechnology, Indonesian Institute of Science, Komplek LIPI, Jl. Sangkuriang, Bandung

40135, Indonesia^1

关键词: Agriculture wastes;    Alternative energy;    Biocoal briquettes;    Chemical and physical properties;    Coal briquettes;    Forming metals;    Hemi-cellulose;    Physical characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/118/1/012066/pdf
DOI  :  10.1088/1755-1315/118/1/012066

来源: IOP

【 摘 要 】

The technology in using briquettes for fuel has been widely used in many countries for both domestic and industrial purposes. Common types of briquette used are coal, peat, charcoal, and biomass. Several researches have been carried out in regards to the production and the use of briquettes. Recently, researches show that mixing coal and biomass will result in an environmentally friendly briquette with better combustion and physical characteristics. This type of briquette is known as bio-coal briquettes. Bio-coal briquettes are made from agriculture waste and coal, which are readily available, cheap and affordable. Researchers make these bio-coal briquettes with different aims and objectives, depending on the issues to address, e.g. utilizing agricultural waste as an alternative energy to replace fossil fuels that are depleting its reserves, adding coal to biomass in order to add calorific value to bio-coal briquette, and adding biomass to coal to improve its chemical and physical properties. In our research, biocoal briquettes are made to utilize low grade coal. The biomass we use, however, is different from the ones used in past researches because it has undergone fermentation. The benefits of using such biomass are 1. Fermentation turns the hemi cellulose into a simpler form, so that the burning activation energy decreases while the calorific value increases. 2. Enzym produced will bind to heavy metals from coal as co-factors, forming metals that are environmentally friendly.