Preparation of Radix Arnebiae ointment

1st International Global on Renewable Energy and Development

Ji, Y.B.^1,2 ; Zhao, H.^1,2 ; Xin, G.S.^1,2 ; Wei, C.^1,2 ; Zhu, H.J.^1,2

Research Center on Life Sciences and Environmental Sciences, Harbin University of Commerce, Harbin, 150076, China^1

Engineering Research Center of Natural Antineoplastic Drugs, Ministry of Education, Harbin

150076, China^2

关键词: Extraction process;    Extraction temperatures;    Frying temperature;    Holding time;    Oil quantities;    Orthogonal method;    Preparation process;    Preparation technology;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/100/1/012051/pdf
DOI  :  10.1088/1755-1315/100/1/012051

来源: IOP

【 摘 要 】

Aim of this study is to prepare Arnebiae ointment research, screening, get the best preparation technology. The preparation process of different frying temperature, different frying time, different oil quantity and dosage ratio were prepared by frying method. The orthogonal method was used in this study. The content of L-shikonin in Arnebiae ointment was used as the research factor, and the preparation process of Arnebiae ointment t was optimized by this method. The experimental results show that the optimum extraction process is the extraction temperature of 110°C, the holding time is 1.5min, and when the ratio of oil to oil is 1:8, the quality of Arnebiae ointment the best. The extraction process can effectively improve the L-shikonin in the Arnebiae Ointment, and the extraction process is reasonable, efficient and economical.