Single-Stage Step up/down Driver for Permanent-Magnet Synchronous Machines

2017 3rd International Conference on Energy, Environment and Materials Science

能源学;生态环境科学;材料科学

Chen, T.R.^1 ; Juan, Y.L.^1 ; Huang, C.Y.^1 ; Kuo, C.T.^1

Department of Electrical Engineering, National Changhua University of Education, No. 2, Shi-Da Road, Changhua City, Taiwan^1

关键词: Brushless dc (BLDC) motors;    Close-loop control;    Conventional topologies;    Permanent magnet synchronous machines;    Permanent Magnet Synchronous Motor;    Prototype circuits;    Three-phase voltage source inverters;    Two stage circuits;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/94/1/012098/pdf
DOI  :  10.1088/1755-1315/94/1/012098

来源: IOP

【 摘 要 】

The two-stage circuit composed of a step up/down dc converter and a three-phase voltage source inverter is usually adopted as the electric vehicle's motor driver. The conventional topology is more complicated. Additional power loss resulted from twice power conversion would also cause lower efficiency. A single-stage step up/down Permanent-Magnet Synchronous Motor driver for Brushless DC (BLDC) Motor is proposed in this study. The number components and circuit complexity are reduced. The low frequency six-step square-wave control is used to reduce the switching losses. In the proposed topology, only one active switch is gated with a high frequency PWM signal for adjusting the rotation speed. The rotor position signals are fed back to calculate the motor speed for digital close-loop control in a MCU. A 600W prototype circuit is constructed to drive a BLDC motor with rated speed 3000 rpm, and can control the speed of six sections.