Experimental investigation of thermal characteristics of lithium ion battery using phase change materials combined with metallic foams and fins

2016 International Conference on New Energy and Future Energy System

Deng, Y.C.^1 ; Zhang, H.Y.^1 ; Xia, X.^1

College of Automotive Engineering, Shanghai University of Engineering Science, 333 Longteng Road, Songjiang, Shanghai, China^1

关键词: Battery temperature;    Environmental test chamber;    Experimental investigations;    Low thermal conductivity;    Management applications;    Thermal characteristics;    Thermal enhancement;    Wall temperatures;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/40/1/012045/pdf
DOI  :  10.1088/1755-1315/40/1/012045

来源: IOP

【 摘 要 】

Phase change materials are of great interest in energy storage and energy management applications due to their high latent heat and excellent cycling stability. In this paper, the thermal characteristics of phase change materials (PCM) for thermal management of cylindrical 18650 lithium-ion battery (LIB) were experimentally investigated. A commercial paraffin wax with a melting temperaturerange between 47 - 53.8oC was used in this study. A metal cylinder with a heater was used to emulate the heat generation from a battery, which was surrounded with the paraffin PCM and containted in a metal housing. The experiment was conducted in an environmental test chamber with controlled ambient temperatures and power inputs. Both the battery temperature and the housing wall temperature were measured during steady-state heating and cyclic heating conditions. Since PCM has low thermal conductivity, thermal enhancement techniques were investigated by adding metal foams (MFs) or combining metallic foam and fins into the PCM to enhance the thermal conductivity. The battery temperatures were measured for all the cases and the results were analyzed and discussed.