Modelling of Dynamic Compensation for Isolated Neutral Power Network

International science and technology conference "Earth science"

Pinchukov, P.S.^1

Far Eastern State Transport University, Seryshev st. 47, Khabarovsk

680021, Russia^1

关键词: Capacitive storage;    Currents and voltages;    Dynamic compensation;    Harmonic components;    Matlab-Simulink software;    Medium-voltage distribution networks;    Three phase networks;    Voltage distortions;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/272/2/022070/pdf
DOI  :  10.1088/1755-1315/272/2/022070

来源: IOP

【 摘 要 】

The paper deal with causes and consequences of the negative influence of harmonic components of currents and voltages in medium voltage distribution networks. The dynamic compensation benefits for filtering harmonic components of currents and voltages and eliminating current and voltage distortion from the power system are considered. In the paper the model of isolated neutral power network with the dynamic compensation device is created by simulation in the Matlab Simulink software. In the model a three-phase network was simulated by blocks from the SimPowerSystem database and the non-sinusoidal load was simulated by a three-phase bridge diode rectifier. The dynamic compensation filtering device is simulated by an inverter on IGBT-transistors and consisted of shunt reverse diodes, smoothing filters and capacitive storage. The simulation results show the reduction of the voltage distortion limits to the normalized values, thus we can eliminate the non-sinusoidal form of the voltage curve and make it sinusoidal by dynamic compensation in the distribution network. The dynamic compensation device operates correctly in the created model and is suitable for high-nonlinear, inductive, fast-changing and harmonic-generating loads, as it effectively fights against the violation of the quality of electrical energy.