Gasket Process Parameter in Metal Forming

International Conference on SMART CITY Innovation 2018

Karohika, I.M.G.^1 ; Antara, I.N.G.^1

Mechanical Engineering Department, Udayana University, Jl. Raya Kampus Unud Blok R No.88, South Kuta, Badung Regency, Bali, Jimbaran

80361, Indonesia^1

关键词: Experimental materials;    Friction coefficients;    Process parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/248/1/012044/pdf
DOI  :  10.1088/1755-1315/248/1/012044

来源: IOP

【 摘 要 】

Gaskets are very important in preventing leakage in the water piping system. Designing a gasket forming process is important to ensure that the products produced are as desired so that they can work optimally to prevent leakage. The use of software based finite element method is widely used in design to minimize the cost, time, and experimental material. In this study examined the effect of forming process parameters such as die type and friction coefficient of dies surface on gasket products. The results of the computer simulation, it is expected to get the best parameters to produce gasket products when gasket produced later.