Statistical control of forming process

7th Modern Technologies in Industrial Engineering

工业技术（总论）

Teodor, V.G.^1 ; Paunoiu, V.^1 ; Carausu, C.^2 ; Baroiu, N.^1 ; Costin, G.A.^1

Dunarea de Jos University of Galati, Faculty of Engineering, Department of Manufacturing Engineering, Domneasca Street, No. 111, Galati, Romania^1

GheorgheAsachi Technical University of Iasi, Faculty of Machine Manufacturing and Industrial Management, Department of Manufacturing Engineering, Blvd. D. Mangeron, No. 59A, Iasi

700050, Romania^2

关键词: Measured values;    Process capability indices;    Process parameters;    Process stability;    Quality characteristic;    Software applications;    Statistical control;    Statistical indicators;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/591/1/012071/pdf
DOI  :  10.1088/1757-899X/591/1/012071

学科分类：工业工程学

来源: IOP

【 摘 要 】

A qualitative product must be obtained through a stable and repeatable process. In order to control a defining characteristic of the quality of a specific product, various specific methodologies have been developed in time. One of the most known methods of this kind is the statistical control of the process which provides users with a powerful and useful range of tools designed to ensure process stability and improve capacity by reducing variability. These tools have the following great advantages: they are simple to use; are effective and can be applied to all processes. This paper presents a software application designed to conduct a forming process by the statistical control method. The program analyzes a database of measured values of the traceability characteristics and identifies whether these values have a statistically normal distribution. In the affirmative case, the main statistical indicators of the considered sample are calculated: maximum and minimum values, amplitude, average value, median, dispersion, process control limits and process capability index. These statistics are displayed both numerically and graphically. By using the software, it is possible to track the process and, if exists the tendency to overcome the control limits, to change the process parameters that caused the change in the quality characteristics.