Combined finish machining of nonrigid parts by the brush electrode

International Conference on Mechanical Engineering, Automation and Control Systems 2016

机械制造;无线电电子学;计算机科学

Smolentsev, V.P.^1 ; Kirillov, O.N.^1 ; Fedonin, O.N.^1 ; Ryazantsev, A.Yu.^1

Voronezh State Technical University, 14 Moscow Ave., Voronezh

394026, Russia^1

关键词: Application fields;    Combined machining;    Difficult to machine materials;    Electrical modes;    Finish machining;    Machine building;    Process stability;    Technological parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/177/1/012009/pdf
DOI  :  10.1088/1757-899X/177/1/012009

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The capacities of extensive use of technology and a combined machining tool by an unshaped brush electrode are discovered. This type of machining occurs during dimensional finish formation of composite parts of small rigidity (including the parts made of difficult-to-machine materials). This process takes place provided that there is required pressure of wire beams in the brush electrode and a combination of electrical modes of the process with tool parameters. The ways of maintaining the process stability, increasing technological parameters, which allows extending the application field of universal high-productive finish machining by an electrode, are presented. This problem has been solved for the first time, and its results make it possible to create items of new generations, which is actual for machine building .