The determination of measurement errors in impedance spectroscopy

International Conference Building Materials, Products and Technologies

材料科学;工业技术（总论）

Lunak, M.^1 ; Kusak, I.^1 ; Chobola, Z.^1

Institute of Physics, Faculty of Civil Engineering, Brno University of Technology, Vevei 95, Brno

60200, Czech Republic^1

关键词: Comparison of measurements;    Concrete materials;    Excitation signals;    Impedance measurement;    Impedance spectroscopy;    Lower frequencies;    Measurement accuracy;    Polarization properties;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/583/1/012030/pdf
DOI  :  10.1088/1757-899X/583/1/012030

来源: IOP

【 摘 要 】

The paper deals with the methodology, quantification and comparison of measurement deviations for two types of the ceramic shard. The ceramic material has better polarization properties than concrete material. For impedance measurement the ceramic shard is more appropriate. The IS method diagnostics based on processing of measured data which aims evaluating the absolute error and the relative error (deviation) of the loss factor values. Results show the spectrum parts which are useful in the lower frequency range only. When Agilent 33220A and Agilent 54645A are used to carry out the IS, the most important factor from the viewpoint of the tgδ(f) determination accuracy is the accuracy of the phase shift between the excitation signal and that at the measured system output. Other factors are the measurement accuracy of the electric capacity and resistance of the oscilloscope input channel.