Numerical study and calculation of the structures of the stands with canopies on the wind impact, taking into account the terrain

International Scientific-Technical Conference on Innovative Engineering Technologies, Equipment and Materials 2018

材料科学;工业技术（总论）

Shmelev, G.N.^1 ; Sabitov, L.S.^2^3 ; Galimullin, I.A.^1 ; Khaidarov, L.I.^1 ; Antonov, A.S.^1

Kazan State University of Architecture and Engineering, 1 Zelenaya street, Kazan

420043, Russia^1

Kazan Volga Region, Federal University, 18 Kremlevskaya street, Kazan

420008, Russia^2

Kazan State Power Engineering University, 51 Krasnoselskaya street, Kazan

420066, Russia^3

关键词: Eurocodes;    Regulatory documents;    Software package ANSYS;    Specialized software;    Wind flow;    Wind impacts;    Wind load;    Wind pressures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/570/1/012097/pdf
DOI  :  10.1088/1757-899X/570/1/012097

来源: IOP

【 摘 要 】

Operation of stands with canopies is possible under different landscape conditions, including conditions in areas with a slope or in areas with various obstacles that change the profile of the wind flow and, accordingly, affect the distribution of wind pressure acting on the surface of the canopy. Determination of the actual wind loads on the stands with a canopy is an important task due to the lack of appropriate schemes in the SP 20.13330.2016 "Loads and impacts". The relevance of this problem is associated with the complexity of tests in specialized wind tunnels, as well as with the rapid development of computational fluid dynamics. In this regard, a numerical study of the aerodynamics of these structures was made in the software package ANSYS Fluent for the analysis of flows of liquids and gases. The article presents a comparison of the results with the schemes of wind pressure for awnings from SP 20.13330.2016 "Loads and effects" and Eurocode "Wind effects". The obtained results were used for verification of similar calculation technologies and specialized software systems, addition of regulatory documents and for "adjustment" of newly commissioned wind tunnels (in order to optimize and improve the efficiency of tests).