Static analysis of the hull plate using the finite element method

Modern Technologies in Industrial Engineering 2015

Ion, A.^1

Constanta Maritime University - Romania, Department of Navigation 104, Mircea cel Batran Street, Constanta, Romania^1

关键词: Container ships;    Distributed Memory;    Multiple processors;    Parallel version;    Second level;    Shared-memory parallels;    Software package ANSYS;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/95/1/012041/pdf
DOI  :  10.1088/1757-899X/95/1/012041

来源: IOP

【 摘 要 】

This paper aims at presenting the static analysis for two levels of a container ship's construction as follows: the first level is at the girder / hull plate and the second level is conducted at the entire strength hull of the vessel. This article will describe the work for the static analysis of a hull plate. We shall use the software package ANSYS Mechanical 14.5. The program is run on a computer with four Intel Xeon X5260 CPU processors at 3.33 GHz, 32 GB memory installed. In terms of software, the shared memory parallel version of ANSYS refers to running ANSYS across multiple cores on a SMP system. The distributed memory parallel version of ANSYS (Distributed ANSYS) refers to running ANSYS across multiple processors on SMP systems or DMP systems..