Definition of distortion power in AC network and analysis of its reasons

International Conference on Mechanical Engineering, Automation and Control Systems 2018

Myatezh, S.V.^1 ; Novolodskiy, M.V.^1 ; Kitova, E.T.^1

Novosibirsk State Technical University, 20, Karl Marks Avenue, Novosibirsk

630073, Russia^1

关键词: Ac networks;    Alternating current;    Distortion power;    MATLAB/ SIMULINK;    Mode optimization;    Non-active power;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/560/1/012113/pdf
DOI  :  10.1088/1757-899X/560/1/012113

来源: IOP

【 摘 要 】

This paper studies the conditions under which such non-active power components as reactive power and distortion power appear in the alternating current power network. By simulating with MatLab Simulink, the validity of formulas obtained by analytical way was tested. The formulas define the components of non-active power based on one of the most well-known theories. The results obtained will be useful for mode optimization in the alternating current networks and for developing effective non-active power compensating technologies.