Prediction of solidification structures in a 9.8 t steel ingot

Joint 5th International Conference on Advances in Solidification Processes;5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining

土木建筑工程;计算机科学

Gerin, Benjamin^1 ; Combeau, Hervé^1 ; Zalonik, Miha^1 ; Poitrault, Isabelle^2 ; Cherif, Maya^2

Université de Lorraine, CNRS, IJL, Nancy

F-54000, France^1

ArcelorMittal Industeel, 56 rue Clemenceau, Le Creusot

F-71201, France^2

关键词: Columnar dendrites;    Columnar zone;    Equi-axed grains;    Macrosegregations;    Solidification structure;    Structural transitions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/529/1/012036/pdf
DOI  :  10.1088/1757-899X/529/1/012036

来源: IOP

【 摘 要 】

The control of the carbon macrosegregation level in steel ingots is important for the structural integrity of the final component. During solidification, the fragmentation of the columnar dendrites is an important source of equiaxed grains, and has a large influence on the macrosegregation and the grain structure. The goal of this study is to show that a numerical model that takes into account fragmentation can describe the formation of the structures and the macrosegregation during solidification of a large steel ingot. The present article describes the multiphase numerical model used in the simulations. The simulation results are compared to experimental data from a 9.8 t ingot cast in A5/6 steel by ArcelorMittal Industeel. The model can then be used to explain the formation of the observed structures. For example, we show that the structural transitions, first from columnar to equiaxed globular and then to equiaxed dendritic at the bottom of the ingot are a consequence of the concurrent transport and growth of the dendrite fragments from the columnar zone. Furthermore, we show that most of the structures are formed very early on during solidification, whereas macrosegregation develops much more gradually.