Design of Dust Collector on Sorting Machine Vibro Mesh Type Using Design for Assembly (DFA) Approach with Boothroyd and Dewhurst Method in PT. Perkebunan Nusantara VIII Ciater

11th International Seminar on Industrial Engineering & Management, "Technology and Innovation Challenges Towards Industry 4.0 Era

工业技术（总论）

Gulo, C.A.^1 ; Rahayu, M.^1 ; Martini, S.^1 ; Kurniawan, M.I.^1

Telkom University, Bandung, Indonesia^1

关键词: Assembly designs;    Design for assembly;    Maintenance process;    Musculoskeletal disorders;    Production process;    Sorting machines;    Work accidents;    Working hours;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/528/1/012009/pdf
DOI  :  10.1088/1757-899X/528/1/012009

学科分类：工业工程学

来源: IOP

【 摘 要 】

PT. Perkebunan Nusantara VIII is a company that produce orthodox black tea in Indonesia with a land area of less than 400 hectares. In the production section, especially the sorting room in sorting machine, which produces dust contaminants are very disturbing operators who are working. For the maintenance process is scheduled for 2 hours on working hours every 1 month, if maintenance takes more than 2 hours it will cause the production process is delayed. To support the maintenance process on dust collector, Design of dust collector using design for assembly (DFA) aproachp using Boothroyd and Dewhurst method. DFA approach is chosen to simplify the process of maintenance dust collector, which required unloading dust collector every maintenance. There are 2 dust collector designs proposed to get the best assembly design. The design of dust collector with optimal assembly time, with the application of Boothroyd and Dewhurst is design 2 with total component of 82 pieces with assembly time of 552.62 sec with assembling efficiency of 24.43%. It is hoped that by using design 2, the dust collector maintenance process does not interfere with the production process and the shorter time of assembly.