Sealing System Analysis of Rotary Piston Pump

2019 4th International Conference on Mechanical, Manufacturing, Modeling and Mechatronics;2019 4th International Conference on Design Engineering and Science

工业技术（总论）;机械制造

Li, M.^1^3 ; Zhang, X.^1 ; Yang, W.^1 ; Zhang, J.^2^3 ; Zhou, Z.^1

Shandong University, Research Center of Geotechnical and Structural Engineering, Jinan

250061, China^1

Beihang University, School of Transportation Science and Engineering, Beijing Key Laboratory for Cooperative Vehicle Infrastructure Systems and Safety Control, Beijing

100191, China^2

Chalmers University of Technology, Department of Architecture and Civil Engineering, Gothenburg

SE412 96, Sweden^3

关键词: Force analysis;    Friction coefficients;    Key design parameters;    Rotate speed;    Sealing ring;    Sealing system;    Structural characteristics;    Working pressures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/520/1/012005/pdf
DOI  :  10.1088/1757-899X/520/1/012005

学科分类：工业工程学

来源: IOP

【 摘 要 】

Rotary piston pump is designed by the Wankel engine. The structure, working feature and sealing system of rotary piston pump are introduced. The mathematical model of the internal cylinder profile and the theoretical flow are obtained by analysing the structural characteristics of the new pump. The axial seal and face seal of the rotary piston pump and their structures are analysed. The force analysis of the sealing strip is carried out in various cases. It can be concluded from the analysis that, for axial sealing, the key parameters that affect seal strip wear are working pressure, rotate speed of the crankshaft and the friction coefficient between sealing strip and inner wall of the cylinder. For axial sealing, the force of the spring under the curved sealing strips, the size of the sealing rings and curved sealing strips and material of them are the key design parameters.