Predicting the Mechanical Features of Cement Mortar Using Destructive and non-Destructive Tests

2nd International Conference on Sustainable Engineering Techniques

工业技术（总论）

Raheem, Shamel Abdul^1 ; Saheb, Majeed Abdul^1 ; Alshreefi, Ruaa Adnan^2 ; Moula, Hayder Hussein^2 ; Maula, Baydaa Hussain^1 ; Mikhael, Qais^1

Institute of Technology-Baghdad, Middle Technical University, Baghdad, Iraq^1

Ministry of Higher Education and Scientific Research, Baghdad, Iraq^2

关键词: Cement mortars;    Destructive methods;    Different origins;    Mechanical feature;    Non-destructive test;    Nondestructive methods;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/518/2/022007/pdf
DOI  :  10.1088/1757-899X/518/2/022007

学科分类：工业工程学

来源: IOP

【 摘 要 】

In this paper a prediction purpose of the mechanical features for cement mortar by using a non-destructive method on cement mortar instead of a destructive method. As well as comparing the different origins of all aspects of cement "manufacturing" between Iraq and Saudi cement. For this purpose, mortar mixture, cubical specimens of 7cm3 sizes were prepared weights used for making one cube of cement mortar are 185g of cement, 555g of standard sand and the percentage of used water is 49% of the weight of the cement determining which one is likely to be the best type from the perspective of tests that have been conducted on both types.