Studies on Density, Corrosion Rate and Hardness Characteristics of Stainless Steel Implanted by Nitrogen Ion

International Conference on Condensed Matters and Advanced Materials 2018

Nikmah, Ainun^1^2 ; Izak Rudyardjo, Djoni^1 ; Ady, Jan^1 ; Taufiq, Ahmad^2

Department of Physics, Faculty of Science and Technology, Airlangga University, Jl. Mulyorejo, Surabaya

60115, Indonesia^1

Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Negeri Malang, Jl. Semarang 5, Malang

65145, Indonesia^2

关键词: Corrosion property;    Dose variations;    Hardness values;    Nitride layers;    Nitrogen ions;    Sample density;    Stainless steel-304;    Thin plate;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/515/1/012018/pdf
DOI  :  10.1088/1757-899X/515/1/012018

来源: IOP

【 摘 要 】

In this work, the surface treatment of stainless steel 304 was conducted using nitrogen an ion implantation route performing at 90 KeV and 100 μA with a dose variation of 0.7 × 1017, 1 × 1017, 1.3 × 1017, and 1.6 × 1017 atoms/cm2. The stainless steel used was a thin plate with a thickness of 2 mm and a diameter of 14 mm. The data analysis showed the sample density increased with the increase of nitrogen ions. The samples had hardness value up to 143.32 HVN at an optimum dose of 1 × 1017 ions/cm2. Such an increase is predicted due to the formation of a new nitride layer on the surface. Furthermore, the corrosion properties showed that the best corrosion resistance was of 0.71 mm/year. The microscope electron investigation presented the addition of nitrogen ions.