Microstructure Analysis and Mechanical Properties of LM25 alloy with AC4B Nano-Composite using Gravity Die Casting Method

2018 5th International Conference on Advanced Engineering and Technology

工业技术（总论）

Pasupathi, M.^1 ; Berlin Raj, S.^2

Department of Mechanical Engineering, Madha Institute of Engineering and Technology, Sadhanathapuram

600122, India^1

CAE Analyst, Skill TeQ, Adambakkam, Chennai

600088, India^2

关键词: Automobile components;    Compressive tests;    Fabrication process;    Micro-structural;    Microstructure analysis;    Microstructure investigations;    Ultimate strength;    Uniform distribution;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/507/1/012023/pdf
DOI  :  10.1088/1757-899X/507/1/012023

学科分类：工业工程学

来源: IOP

【 摘 要 】

Casting of Aluminium alloys with zero defects would be the ultimate aim of any manufacturer. In the present work, the Alloy LM25 which was being used for the manufacturing of intricate Automobile components is compared to Alloy AC4B Nano-composite using Gravity Die Casting method. In order to investigate the mechanical properties of the concerned materials, Tensile followed by Hardness, and Compressive tests was implemented. Microstructure investigation is examined using Scanning Electron Microscope. The outcome from micro structural study confesses the uniform distribution, grain refinement, and low porosity in Nano-composite specimen. Mechanical results affirm that addition of B4C Nano-composite leads to enhancement of yield strength, ultimate strength and hardness. The uplift in mechanical properties manifested that the type of fabrication process and particle size involved in it.