Optimization of Carbon Dioxide Reduction in Biohythane Using an Innovative Water Scrubber

9th Thai Society of Mechanical Engineers, International Conference on Mechanical Engineering

Chuayboon, S.^1 ; Danugviluilux, P.^1 ; Prasertsan, S.^2 ; Prasertsan, P.^3

Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology, Ladkrabang Prince of Chumphon Campus, Pathiu, Chumphon

86160, Thailand^1

Department of Mechanical Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla

90112, Thailand^2

Department of Industrial Biotechnology, Faculty of Agro-Industry, Prince of Songkla University, Hatyai, Songkhla

90112, Thailand^3

关键词: Carbon dioxide reduction;    Central composite designs;    CO2 concentration;    Optimal conditions;    Palm oil mill effluents;    Response surface methodology;    Scrubber systems;    Water flow rate;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/501/1/012003/pdf
DOI  :  10.1088/1757-899X/501/1/012003

来源: IOP

【 摘 要 】

The major problem of biohythane production from palm oil mill effluent is the high carbon dioxide (CO2) content. In this study, an innovative water scrubber system for upgrading biohythane has been experimentally investigated. Biohythane composing of ∼53.34% of CH4, ∼39.12% of CO2, and ∼7.54% of H2 was simulated regarding the composition of biohythane in the lab scale. Response surface methodology (RSM); a 5-level, 3-factor, central composite design (CCD), was employed to optimize three important parameters (biohythane flow-rate, water flow-rate, and operating time) in order to minimize the CO2 content in the biohythane production. As a result, CO2 concentration decreased with the increase of both the operating time and water flow-rate but inversely proportion to the biohythane flow-rate, which led to higher CO2 absorption by water. The optimal condition regarding the maximum value of CO2 reduction was found at: 3 Nl/min of biohythane flow-rate, 16 Nl/min of water flow-rate, and 9 min of operating time, thereby yielding 77.6% of CO2 reduction.