Aerodynamics of a circular planform wing

4th International Conference on Mechanical, Automotive and Aerospace Engineering

机械制造;航空航天工程;运输工程

Ali, Suliman M. M.^1 ; Omar, Ashraf A.^1 ; Faris, Waleed Fekry^1 ; Ismail, Ahmad Faris^1 ; Mohamed Ali, J.S.^1

Kulliyyah of Engineering, International Islamic University Malaysia, Malaysia^1

关键词: Commercial software;    High angle of attack;    High Reynolds number;    Lift and drag coefficients;    Numerical results;    Separation regions;    Velocity contours;    Wing configurations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/488/1/012005/pdf
DOI  :  10.1088/1757-899X/488/1/012005

学科分类：航空航天科学

来源: IOP

【 摘 要 】

This paper investigates the aerodynamics of a circular plan form wing at high Reynolds numbers numerically. Commercial software STAR-CCM+ has been used for the study. The numerical results were presented in terms of flow visualization, pressure over the wing, velocity contour and streamlines, lift and drag coefficients for angle of attacks ranging from 0° to 30° and Reynolds number equal to 510,000. The results showed that the distribution of the pressure is dominated by vortices behaviour at high angle of attack. The results also show that there is a large separation region located on the trailing edge of the elevator and the cockpit region. It is evident that this type of wing configurations plays a very important role in delaying or preventing the flow separation. The result agreed with available experimental data.