It is difficult to detect ports in polarimetric SAR images due to the complicated components, morphology, and coastal environment. This paper proposes an unsupervised port detection method by extracting the water of the port based on three-component decomposition and multi-scale thresholding segmentation. Firstly, the polarimetric characteristics of the port water are analyzed using modified three-component decomposition. Secondly, the volume scattering power and the power ratio of the double-bounce scattering power to the volume scattering power (PRDV) are used to extract the port water. Water and land are first separated by a global thresholding segmentation of the volume scattering power, in which the sampling region used for the threshold calculation is automatically selected by a proposed homogeneity measure. The interference water regions in the ports are then separated from the water by segmenting the PRDV using the multi-scale thresholding segmentation method. The regions of interest (ROIs) of the ports are then extracted by determining the connected interference water regions with a large area. Finally, ports are recognized by examining the area ratio of strong scattering pixels to the land in the extracted ROIs. Seven single quad-polarization SAR images acquired by RADARSAT-2 covering the coasts of Dalian, Zhanjiang, Fujian, Tianjin, Lingshui, and Boao in China and Berkeley in America are used to test the proposed method. The experimental results show that all ports are correctly and quickly detected. The false alarm rates are zero, the intersection of union section (IoU) indexes between the detected port and the ground truth can reach 75%, and the average processing time can be less than 100 s.

Offshore oil platforms are difficult to detect due to the complex sea state, the sparseness of target distribution, and the similarity of targets with ships. In this paper, we propose an oil platform detection method in polarimetric synthetic aperture radar (PolSAR) images using level set segmentation of a limited initial region and a convolutional neural network (CNN). Firstly, to reduce the interference of sea clutter, the offshore strong scattering targets were initially detected by the generalized optimization of polarimetric contrast enhancement (GOPCE) detector. Secondly, to accurately locate the contour of targets and eliminate false alarms, the coarse results were refined using an improved level set segmentation method. An algorithm for splitting and merging the smallest enclosing circle (SMSEC) was proposed to cover the coarse results and obtain the initial level set function. Finally, the LeNet-5 CNN model was used to classify the oil platforms and ships. Experimental results using multiple sets of polarimetric SAR data acquired by RADARSAT-2 show that the performance of the proposed method, including the detection rate, the false alarm rate, and the Intersection over Union (IOU) index between the extracted ROI and the ground truth, is better than the performance of a method that combines a GOPCE detector and a support vector machine classifier.